February 19, 2014 at 3:35 pm #435
MAGNOVITE 2014 – A Techno Cultural Fest – CHRIST University ,Bangalore
Faculty of Engineering present Magnovite 2014 – Techno cultural Fest on Feb 21 & Feb22 February 19, 2014.
Win several lakhs.
Venue : Christ University ,Kengeri Campus, Kumbalgodu, Kanminike, Bangalore-60
Magnovite is the annual techno-cultural fest of the Christ University Faculty Of Engineering, Bangalore, slated to be held on the 22nd and 23rd of February 2013.
Magnovite 2013 aims at encouraging scientific thinking, innovation, and knowledge of technology among the masses.
The Christ University Faculty of Engineering was started in 14th September 2009 to promote quality Technical Education in Engineering. It strives to develop effective leaders in Engineering / Technology with ethical and human values to reshape the nation. At CUFE-Kengeri, learning is not just a series of instructions but a passion, which goes beyond books, beyond instructions, beyond horizons. Here, we enable students to learn by capturing experiences and exploring new realms of wisdom.
EVENT DESCRIPTION: Robo Wars is a group event where two teams contest together in a one on one fight involving their bots for the qualification to the next round. The robots can be self designed or purchased. These robots can be controlled with a wire or wireless remote.
RULES AND GUIDELINES:Task: Design and construct a wired or wireless controlled robot capable of fighting a one on one tournament.
Specifications : Dimensions and Fabrications
1. The machine should fit in a box of dimension 750mm x 750mm x 1000 mm (l x b x h) at any given point during the match. The external device used to control the machine or any external tank is not included in the size constraint.
2. The machine should not exceed
Category 1: 15kg Category 2: 30kg
of weight including the weight of pneumatic or hydraulic source/tank. All pneumatic or hydraulic tanks/source and batteries should be onboard. Weight of remote controller will not be counted.
Battery and Power
1. The machine can be powered electrically only. Use of an IC engine in any form is not allowed. On board batteries must be sealed, immobilized-electrolyte types (such as gel cells, lithium, NiCad, NiMH, or dry cells).
2. The electric voltage between 2 points anywhere in the machine should not be more than 36V DC at any point of time.
3. All efforts must be made to protect battery terminals from a direct short and causing a battery fire, failure to do so will cause direct disqualification and Etc..
• Robot can use non-inflammable liquid to actuate hydraulic devices e.g. cylinders.
• All hydraulic components on-board must be securely mounted. Special care must be taken while mounting pump, accumulator and armor to ensure that if ruptured direct fluid streams will not escape the robot.
• All hydraulic liquids are required to be non-corrosive and your device should be leak proof. Maximum allowed pressure is 10 bars.
• Participant must be able to indicate the used pressure with integrated or temporarily fitted pressure gauge.
• Entire hydraulic setup should be onboard, no external input (from outside the arena) can be given to the robot for functioning of its hydraulic system.
Robots can have any kind of magnetic weapons, cutters, flippers, saws, lifting devices, spinning hammers etc. as weapons with following exceptions and limitations:
• Liquid projectiles.
• Any kind of inflammable liquid.
• Flame-based weapons.
• Any kind of explosive or intentionally ignited solid or potentially ignitable solid.
• Nets, tape, glue, or any other entanglement device.
• 9. Spinning weapons which do not come in contact with the arena at any point of time are allowed.
More Details for Registration visit @ http://www.magnovite.org
You must be logged in to reply to this topic.